How to Repair Badge Printer Tape Breakage
How to Repair Badge Printer Tape Breakage
1. Open up the Center Panel on the front of the printer and remove the Print Tape Cartridge.
2. Inspect inside the cartridge slot and make sure there is not any loose tape up in the mechanism.
3. Take the two ends of the tape and use scotch tape to tape them back together.
4. Wind the tape a couple rotations forward so that the repair is covered.
5. Return the cartridge to the printer.
6. Press the Pause button. This will resume the printing.
7. If printing does not resume in 10 seconds, press the Pause symbol again.