How to Log In To DILAX
How to Log in to the DILAX
There are three ways to log into the DILAX. Remotely using the Verizon IP, locally via wireless using the CP IP, and locally via hardwire.
Remotely Using Verizon IP
- Log in to NetCloud and search for the desired Bus #.
- Click on the Bus # and scroll down to where it says Verizon Wireless.
- Copy the IP address.
- Paste the IP address into IE with the following format: http://IPADDRESS:9999
- You should now be logged into the DILAX
Locally Via Wireless
- Logon to MVTA_XXXX where XXXX is the Bus #. The password is MVTATran$it1
- In IE navigate to 192.168.23.200
- You should now be logged into the DILAX
Locally Via Hardwire
- Disconnect Ethernet Cable from DILAX.
- Connect a different Ethernet Cable from a Laptop to the DILAX.
- Configure IPV4 network configuration with the following information:
- IP Address: 192.168.23.10
- Subnet Mask: 255.255.255.0
- Open Internet Explorer
- Navigate to 192.168.23.200
- You should now be logged into the DILAX