How to Setup and Login to SEON DVR via Ethernet
How to Login to SEON DVR via Ethernet
NOTE: This guide was written for Maintenance.
To Connect after completing Setup below:
- Turn on laptop
- Open DVR Cover
- Connect Ethernet from Laptop to Front Ethernet port on DVR
- Open IE (only works with IE)
- Navigate to 10.10.9.2 (or click SEON DVR bookmark in Bookmark Bar)
- Login information:
- UN: Admin
- PW: minnemn0
- The main web interface should now be loaded.
To Setup for First Time:
- Turn on laptop
- Open DVR Cover
- Connect Ethernet from Laptop to Front Ethernet port on DVR
- Click Start Button and Type ncpa.cpl and Press Enter
- Right Click on Local Area Connection > Click Properties
- Click on Internet Protocol Version 4 (TCP/IPv4) > Then Click Properties
- Click “Use the following IP address” and enter the following information:
- Click Ok > Click Ok on Local Area Connection Properties window.
- Open IE
- Navigate to 10.10.9.2
- Login information:
- UN: Admin
- PW: minnemn0
- Click Install on the bar that pops up on the bottom of the browser.
- Click install on the Security Warning Pop Up
- The main web interface should now be loaded.