How to download DILAX config data
How to download the Dilax config file
Connect to the Dilax system locally or remotely.
PURPOSE
The purpose of this document is to establish a clear framework for the extraction of the Dilax configuration file. This framework aims to enforce best practices, ensure standard compliance, and mitigate potential failures.
SCOPE
This document's scope encompasses two procedures to extract the data from the Dilax PCU.
RESPONSIBILITIES
IT is responsible for any procedures in which a data transfer takes place.
Locally Via Hardwire
- Disconnect Ethernet Cable from DILAX.
- Connect a different Ethernet Cable from a Laptop to the DILAX.
- Configure IPV4 network configuration with the following information:
- IP Address: 192.168.23.10
- Subnet Mask: 255.255.255.0
- Gateway: 192.168.23.100
- Open Internet Explorer
- Navigate to 192.168.23.200
- You should now be logged into the DILAX.
Remotely
- Look up remote hardware addresses via the Bus Hardware Inventory Spreadsheet.
- Open a web browser and enter the remote IP address.
- You should now be logged into the DILAX.
- Choose Load / Save option
-
Click Download
- This will download the file to your downloads folder.
-
Search for the config.xml file in your downloads.
