How to login to Safe Fleet/Seon DVR locally

How to login to Safe Fleet/Seon DVR locally

PURPOSE

The purpose of this document is to establish a clear framework for the local login to the onboard Seon system. This framework aims to enforce best practices, ensure standard compliance, and mitigate potential failures.

SCOPE

This document's scope encompasses a single procedure on how to connect locally.

RESPONSIBILITIES

IT is responsible for any procedures in which a connection is made to any MVTA hardware.

NOTE – Factory default login to front port is set to.

Username – Admin

Password – 11111111

TH 8 System

Change the NIC address on your computer to the following.
1. IP address - 192.168.0.101
2. Subnet Mask - 255.255.255.0
3. LAN Gateway - 192.168.0.100
Plug an ethernet cable into your pc and the front port of the DVR.
Use Edge in IE mode and navigate to 192.168.0.100
Login with the following credentials
1. Username – Admin
2. Password – minnemn0

All other Safe Fleet/Seon systems

Change the NIC address on your computer to the following.
1. IP address – 10.10.9.2
2. Subnet Mask - 255.255.255.0
3. LAN Gateway – 10.10.9.1
Plug an ethernet cable into your pc and the front port of the DVR.
Use Edge in IE mode and navigate to 10.10.9.2
Login with the following credentials
1. Username – Admin
2. Password – minnemn0